Mr. Li’s incredible 2-In-1 tools have revolutionized the automotive locksmithing industry. To make certain that his tools are not illegally copied or distributed, Mr. Li has implemented a verification system that will guarantee that you are getting tools that offer only the highest level of quality.

The verification system incorporates a printed sticker attached to the back of tools that are manufactured by Mr. Li and meet his highest levels of quality. If your tool does not have on of Mr. Li’s verification stickers, please contact your tool vendor immediately and ask them why. Only vendors that are authorized to sell Mr. Li’s tools will stock those that have the verification sticker. To see a list of the authorized vendors visit: Authorized Tool Vendors.

Tool Verification NumbersTo register your tools carefully follow these instructions:

  1. Visit the tool verification area by clicking the Verify Your Tools link at the top of this page.
  2. Scratch off the protective coating over the Left Hand and Right Hand tool verification numbers.
  3. Enter the Left Hand Verification Number into the left verification text box on the website.
  4. Enter the Right Hand Verification Number into the right verification text box on the website.
  5. Enter your email address. (Note: this is the email address that will be associated with the tool that you are verifying).
  6. Enter the Captcha text.
  7. Click the Verify Now button.

  1. Once the tool verification number is confirmed, you will see the following screen which contains the date and time of verification along with your tool serial number. You may want to record this information or print the screen for your records.

Tool Verification Screen 2

Thank you for choosing and supporting Original Lishi tools.

Tool Verification Scenarios

The following three (2) boxes show the results of various scenarios during the registration. The box on the left shows a normal registration process that has completed successfully. The middle box show what happens if a tool is registered twice. The box on the right shows what happens if the registration process is not completed successfully.

If you are having trouble with the registration process, contact the vendor that sold you the tool(s) and have them assist you with the process.

Successful Tool Verification

After you scratch the protective coating from the label on the back of the tool, visit the registration area. Enter the tool verification numbers as described above and click the Verify Now button.

If you have entered everything properly you should see the following confirming that your tool has successfully verified. If you do not see the Congratulations! message, contact your vendor for further information.

Successful Verification Screen 2

2nd Time Tool Verification Process

After you scratch the protective coating from the label on the back of the tool, visit the registration area. Enter the tool verification numbers as described above and click the Verify Now button.

If you see the following screen after clicking the Verify Now button, either you tool has already been verified or you do not have a tool manufactured by Mr. Li. Contact your vendor for further information.

2nd Time Verifying 2

Unsuccessful Tool Verification

After you scratch the protective coating from the label on the back of the tool, visit the registration area. Enter the tool verification numbers as described above and click the Verify Now button.

Unsuccessful Verification 1

If you see the Tool Verification Failed message, contact your vendor for further information.

Unsuccessful Verification 2

Verification FAQs

Do I have to verify my new tools?

No you do not, but validation insures that you are getting only tools that meet Mr. Li’s rigorous quality standards.

My brand new Original Lishi tool does not have a sticker what should I do?

Contact your tool vendor and ask them why your tools do not have a Validation Sticker.

How do I know where to get tools that are only manufactured by Mr. Li and Original Lishi tools?

Simple, visit our Authorized Vendor page.

I’m having trouble with the numbers on my label being recognized by the verification website what should I do?

Contact your tool vendor and ask them why your tools are not validating properly.